Mount metal objects on the wall using Pattex PL150

1. Cut off tip of the cartridge above the screw thread. Screw on plastic nozzle and cut off the tip of the nozzle. Place cartridge into gun.
2. Apply adhesive onto one of the surfaces. Ensure surface to be bonded are free of dust, grease or oil and not in permanent contact with water.
3. To ensure a proper bond, press firmly so that all surfaces are in contact with the adhesive.
4. Heavy items and items under tension have to be supported and fixed for at least 24 hours.
5. Remove residues immediately with a damp cloth. 

For detailed information on how to use, download the technical data sheet below.