Skip to Content
4 min reading time
Mount and Build

Install a carpet or artificial grass with Pattex Contact Adhesive

Step by step

  1. Surfaces should be levelled, dry, clean of dust and free of substances which may impair adhesion.
  2. Apply a thin layer of Contact Adhesive (Premium) on both surfaces with a brush or trowel.
  3. Wait 10 to 15 minutes for the solvent to evaporate from the adhesive.
  4. Bring together, and strongly press the two surfaces for a short period of time.
  5. Successful adhesion depends on the strength and not on the time span of the applied pressure. 

For detailed information on how to use, download the technical data sheet below.

Documents and downloads

  • ${/content/heliux/adhesive/pattex/ae/en/products/central-pdp#/pattex-contact-adhesive-premium/SAP_0201FSP03BBZ/searchResult.MainImageAltText}
    PATTEX Contact Adhesive (Premium)

    PATTEX Contact Adhesive is a premium quality, high tack, one part polychloroprene multipurpose contact adhesive. Free of harmful substances.

Share your own projects

You may also be interested in