Product Advisor

Find the perfect solution for all your projects with our glue finder

Pattex FT 101

General Information

Pattex FT101 is an all purpose sealant & multipurpose adhesive for indoor and outdoor applications based on Flextec® Technology. It provides excellent elasticity, high initial tack, can be applied to damp surfaces, UV, weather and aging resistance,  solvent-free, sandable, good gunnability even at low temperatures, no shrinkage during curing, can be painted after curing.

Features and Benefits

  • Indoor & outdoor
  • Multipurpose sealant & construction adhesive
  • Seals & bonds all absorbent & non-absorbent materials
  • Excellent primerless adhesion
  • Paintable
  • No shrinkage
  • Transparent

Available sizes:

How to use


  1. Insert cartridge into sealant gun and firmly extrude FT101-Transparent into joint making sure that it is full contact with the side of the joint.
  2. Fill the joint, avoiding air entrapment. FT101-Transparent must be tooled firmly against joint sides to ensure good adhesion.
  3. After application, the product can be smoothed with soapy water before skinning for a perfect sealant surface.


  1. Apply FT101-Transparent in strips or spots on the bonding surface at intervals of a few centimeters.
  2. Use hand pressure to set the element to be bonded into position. If necessary, use adhesive tape, wedges, or props to hold the assembled elements together for the initial hours of curing.
  3. An incorrectly positioned element can be easily unfastened and repositioned in the first few minutes after application. Apply pressure again.
  4. Optimum bonding will be obtained after complete curing of FT101-Transparent, i.e. after 24 to 48 hours.

For detailed information on how to use, download the technical data sheet above.