Pattex SL 100

General Information

Pattex SL100 has superior adhesion and good elasticity. Suitable for the sealing of low movement joints between various construction materials (aluminum, wood, concrete, brick etc.) and for sealing joints between windows, walls, doors etc. Able to handle movement up to 15%. Also suitable for filling cracks in walls and on ceilings. Water based & non-toxic. Over paintable in 1 hour and very low VOC content.

Features and Benefits

Indoor
Ideal for crack filling & joints
Paintable in 1 hour
No odor
Very low VOC content
For aluminum & other porous substrates

Available sizes:

280 ml

Documents and Downloads

english

english

How to use

The joints must be clean and free from dust, grease and rust.
No primer is required for non-porous surfaces. On porous surfaces such as concrete, stone, cement and plaster a primer (mixture of 1 part acrylic sealant and 4-5 parts of water) can be applied.
Application temperature is between +5 °C and +35 °C.
Immediately after the application, smooth the sealant at once with wet finger or a wet tool.
Excess sealant can be removed by a wet cloth. Keep the sealed joint dry at least for two hours.

For detailed information on how to use, download the technical data sheet above.